Automatic L Bar wrapperwith heat tunnel

TPC model 1022 L Bar sealer wrapper with serial # 21198
240 volts/ 10 Amps / 80 PSI
Manufactured 3/93

Heat Seal shrink tunnel model T3422/10 Series H with serial GKA9627
220 volts/1/60
Tunnel opening 19.5″ x 10″

SOLD APRIL 2010
Clear Film / model PH-24-DL, SN 3290. 480v-3ph-60hz, Mfg’d 2005
Intermittent motion wrapper with in-line infeed capable of multi-packing / wrapping product with polyethylene film.
A-B Micrologix 1500 processor, caster mounted, double walled insulated tunnel with adjustable air flow baffles

Clear Film / model CFH-32-40, SN 3022. 230v-3ph-60hz, Mfg’d 2000
Continuous motion wrapper with in-line infeed capable of complete wrapping product with polyethylene film. A-B processor, caster mounted, double walled insulated tunnel with adjustable air flow baffles. Center Lug infeed conveyor
Unit was installed then de-commissioned due to lack of production.

Serial # 109-97, built in 1997.
High speed bottom lap seal tray bundler. Up to 60 BPM
Currently set on clear film but can run print registered film with add on OEM parts.
Last running beverage trays. Giddings & Lewis PLC

Horizontal Flow Wrapper up to 130 PPM
Serial # 02-028, installed in 2003
Last set to run books and pamphlets
Flighted 20′ infeed conveyor

SOLD August 2010
Automatic L Bar sealer with tunnel
Wrapper is model # IL-17D with serial # 17D0897163
Shrink Tunnel is model VST-1709-TMB with serial # 158170397
Hi Tech now owned by Shrink Tech in St Louis
Product range 2″ to 16″ wide, 1″ to 8″ high with any length.
Includes product staging and gapping, AB PLC, variable speed film feed, universal solid knife side seal, crank adjustments, floor level film cradle, and variable speed scrap rewind.

Just purchased 3 Great Lakes model 708 shrink bundlers from an ice cream operation.  Built in stainless.  These are right angle bundlers.
More photos once units are in our warehouse.
OEM link to brochure >> http://www.arpac.com/product4.asp?machine=102

Beseler model 1611
Small self contained L Bar wrapper with integrated shrink tunnel
Good condition

Video > http://www.youtube.com/watch?v=IR7MdEEcPBU

Arpac Model 55GI-20 with serial # 3966
163” long x 50” wide x 78” tall
Est weight 3000 lbs
35”  conveyor height
13” infeed belt width
11” height of seal bar
Tunnel opening 16” x 22”
460/3/60
AB 5/02
Arpac touch panel controls
Full set of guards
20″ film max
OEM Brochure >> http://www.arpac.com/product4.asp?machine=127

In line shrink wrapper and tunnel. Fair condition
Serial # 1380
Seal bar height 12.5″ and 28″ long
Measurements 108″ long x 52″ wide
Missing top roll carriage

SOLD May 2010
Arpac model 25TW-28
Installed then lost contract
Still in line, unused
Serial # 10052

ARPAC 108D-50 right angle bundler for cartons or bottles. Includes pattern building section and dual lane infeed section. Last running hair care bottles into 6 packs, unsupported and in clear film. Heat shrink tunnel included
Installed in 1999 this unit remains in excellent condition.
Serial # 3805

SOLD JUNE 2010
Item #: 7530
Manufacturer & Model:
Arpac 108-32
Serial # 2073
Last running phone books
Right Angle 90 degree infeed
32 inch seal bar
Left and right side hold down seal rollers
Dual zone heat tunnel
Temperature Controllers
Powered infeed and Carry through
Allen Bradley SLC 150 PLC Controller
Allen Bradley Operator Interface
Blower on Discharge End
Casters for easy mobility
Standard Safety Features
Electrical 460 Volts 3 phase 60 Hz.
50 Amps Full current load